Home > Stainless Steel > UNS S24000 datasheet,UNS S24000 chemical,UNS S24000 heat treatment

UNS S24000 datasheet,UNS S24000 chemical,UNS S24000 heat treatment
2019-08-15 12:53:17   Source:   Criticism:0 CTR:

This page provides UNS S24000 stock,UNS S24000 datasheet,UNS S24000 mechanical properties, UNS S24000 chemical element,UNS S24000 performance specifications.
Chemical Composition (Weight %)
C (%) ≤ 0.08
Si(%) ≤ 1.00
Mn(%) 11.5 ~ 14.5
P(%) ≤ 0.060
S (%) ≤ 0.030
Cr (%) 17.0 ~ 19.0
Ni (%) 2.25 ~ 3.75
Mo(%) -
Other (%) 0.20 ~ 0.40
Mechanical Properties
Condition of heat treatment -
Tensile Rm (MPa) 689
Yield Rp0.2 (MPa) 378
Elongation A (%) 40.0
Reduction in cross section on fracture Z (%) -
Impact AKV/AKU (J) -
Brinell Hardness (HBW) 241max
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Forms and Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Related hot word search:UNS S24000

Prev:ASTM XM-29 datasheet,ASTM XM-29 chemical,ASTM XM-29 heat treatment
Next:最后一页