Home > Stainless Steel > UNS S21500 datasheet,UNS S21500 chemical,UNS S21500 heat treatment

UNS S21500 datasheet,UNS S21500 chemical,UNS S21500 heat treatment
2019-08-14 17:23:51   Source:   Criticism:0 CTR:

This page provides UNS S21500 datasheet, UNS S21500 mechanical properties, chemical element UNS S21500, technical specifications of UNS S21500 steel material properties. UNS S21500 performance specifications.
Chemical Composition (Weight %)
C (%) 0.06 ~ 0.15
Si(%) 0.20 ~ 1.20
Mn(%) 5.50 ~ 7.50
P(%) ≤ 0.040
S (%) ≤ 0.030
Cr (%) 14.0 ~ 16.0
Ni (%) 9.00 ~ 11.0
Mo(%) -
Other (%) Nb 0.75~1.25
V 0.15~0.40
B 0.003~0.009
Mechanical Properties
Condition of heat treatment -
Tensile Rm (MPa) 540 570
Yield Rp0.2 (MPa) 270
Elongation A (%) 35.0
Reduction in cross section on fracture Z (%) -
Impact AKV/AKU (J) -
Brinell Hardness (HBW) -
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Forms and Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Related hot word search:UNS S21500

Prev:UNS S21460 datasheet,UNS S21460 chemical,UNS S21460 heat treatment
Next:最后一页