Home > Stainless Steel > ASTM XM-19 datasheet,ASTM XM-19 chemical,ASTM XM-19 heat treatment

ASTM XM-19 datasheet,ASTM XM-19 chemical,ASTM XM-19 heat treatment
2019-08-14 10:07:03   Source:   Criticism:0 CTR:

This page provides ASTM XM-19 datasheet, ASTM XM-19 mechanical properties, chemical element ASTM XM-19, technical specifications of ASTM XM-19 steel material properties. ASTM XM-19 performance specifications.
Chemical Composition (Weight %)
C (%) ≤ 0.06
Si(%) ≤ 1.00
Mn(%) 4.00~6.00
P(%) ≤ 0.040
S (%) ≤ 0.030
Cr (%) 20.5 ~ 23.5
Ni (%) 11.5 ~ 13.5
Mo(%) 1.50 ~ 3.00
Other (%) Nb 0.10 ~ 0.30
N 0.20 ~ 0.40
V 0.10 ~ 0.30  
Mechanical Properties
Condition of heat treatment -
Tensile Rm (MPa) 690
Yield Rp0.2 (MPa) 380
Elongation A (%) 35.0
Reduction in cross section on fracture Z (%) -
Impact AKV/AKU (J) -
Brinell Hardness (HBW) -
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Forms and Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Related hot word search:ASTM XM-19

Prev:UNS S20910 datasheet,UNS S20910 chemical,UNS S20910 heat treatment
Next:最后一页