Home > Stainless Steel > AISI 205 datasheet,AISI 205 chemical,AISI 205 heat treatment

AISI 205 datasheet,AISI 205 chemical,AISI 205 heat treatment
2019-08-14 10:04:00   Source:   Criticism:0 CTR:

This page provides AISI 205 datasheet, AISI 205 mechanical properties, chemical element AISI 205, technical specifications of AISI 205 steel material properties AISI 205 performance specifications
Chemical Composition (Weight %)
C (%) ≤ 0.12
Si(%) ≤ 1.00
Mn(%) 14.0~15.5
P(%) ≤ 0.060
S (%) ≤ 0.030
Cr (%) 16.5 ~ 18.0
Ni (%) 1.00 ~ 1.75
Mo(%) -
Other (%) N 0.32 ~ 0.40
Mechanical Properties
Condition of heat treatment annealing
Tensile Rm (MPa) 790
Yield Rp0.2 (MPa) 330
Elongation A (%) 45.0
Reduction in cross section on fracture Z (%) 40.0
Impact AKV/AKU (J) -
Brinell Hardness (HBW) 100
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Forms and Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Related hot word search:AISI 205

Prev:UNS S20400 datasheet,UNS S20400 chemical,UNS S20400 heat treatment
Next:ASTM 205 datasheet,ASTM 205 chemical,ASTM 205 heat treatment