Home > Stainless Steel > AISI 203Z datasheet,AISI 203Z chemical,AISI 203Z heat treatment

AISI 203Z datasheet,AISI 203Z chemical,AISI 203Z heat treatment
2019-08-14 09:59:02   Source:   Criticism:0 CTR:

This page provides AISI 203Z datasheet, AISI 203Z mechanical properties, chemical element AISI 203Z, technical specifications of AISI 203Z steel material properties. AISI 203Z performance specifications.
Chemical Composition (Weight %)
C (%) ≤ 0.08
Si(%) ≤ 1.00
Mn(%) 5.00~6.50
P(%) ≤ 0.040
S (%) 0.18 ~ 0.35
Cr (%) 16.0 ~ 18.0
Ni (%) 5.00 ~ 6.50
Mo(%) ≤ 0.50
Other (%) Cu 1.75 ~ 2.25
Mechanical Properties
Condition of heat treatment -
Tensile Rm (MPa) 655
Yield Rp0.2 (MPa) 330
Elongation A (%) -
Reduction in cross section on fracture Z (%) -
Impact AKV/AKU (J) -
Brinell hardness (HBW) -
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Forms and Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Related hot word search:AISI 203Z

Prev:UNS S20200 datasheet,UNS S20200 chemical,UNS S20200 heat treatment
Next:最后一页