Home > Stainless Steel > AISI 201L datasheet,AISI 201L chemical,AISI 201L heat treatment

AISI 201L datasheet,AISI 201L chemical,AISI 201L heat treatment
2019-08-14 09:52:00   Source:   Criticism:0 CTR:

This page provides AISI 201L datasheet, AISI 201L mechanical properties, chemical element AISI 201L, technical specifications of AISI 201L steel material properties. AISI 201L performance specifications.
Chemical Composition (Weight %)
C (%) ≤ 0.03
Si(%) ≤ 0.75
Mn(%) 5.05~7.50
P(%) ≤ 0.045
S (%) ≤ 0.030
Cr (%) 16.0 ~ 18.0
Ni (%) 3.50 ~ 5.50
Mo(%) -
Other (%) N ≤ 0.25
Mechanical Properties
Condition of heat treatment -
Tensile Rm (MPa) 655
Yield Rp0.2 (MPa) 260
Elongation A (%) 40.0
Reduction in cross section on fracture Z (%) -
Impact AKV/AKU (J) -
Brinell Hardness (HBW) 217 max.
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.
Forms and Shapes:
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM

Related hot word search:AISI 201L

Prev:UNS S20100 datasheet,UNS S20100 chemical,UNS S20100 heat treatment
Next:最后一页